Heart O' Gold Shelties Rescue
Home
Our Dogs
Puppies
Facilities
Philosophies
Stories and Poems
Friends and Pets
Sheltie Tether Ball
The Grapevine
Seasonal
Rescue
Sheltie Links
Awards
Contact Us
Site Map
Assembly instructions

Step 1

MEASURE YOUR CRATE - Prior to beginning construction of your trap, you will need to remove the crate door and accurately measure the dimensions shown.

Note - Measure A & B to the outside edge of the door flange at the widest part.


A = ________"


B = ________"
Step 1


Note - Measure C & D to the centerline of the holes where the door mounts to the door flange.


C = ________"


D = ________"
Step 1

Step 2

Cut top, bottom and two sidepieces, as shown below, using 2" x 3" studs for lumber. You can rip larger lumber to 2-1/2" wide from leftover scrap, if necessary.
Top and Bottom Pieces (top view)
Step 2 		Side pieces
(edge view)
Step 2

Step 3

Assemble the doorframe, as shown below, using (4) - 1-5/8" drywall screws. Be sure to pre-drill top and bottom pieces with a 1/8" drill bit prior to assembly.
Step 3

« Previous  |  Next »

· Home · Our Dogs · Puppies · Facilities · Philosophies · Stories & Poems ·
· Friends & Pets · Sheltie Tetherball · The Grapevine · Seasonal ·
· Rescue · Sheltie Links · Awards · Contact Us · Site Map ·

© 1999 - 2001 by John E. Rueckert - All Rights Reserved