This stitch and glue construction v bottom boat is 13 ft 4 inches long
overall, has a beam of 5 ft 2 inches and draws 10 inches. The boat
is designed for 2-4 passemgers and is powered by a 1/2 to 1 hp electric
DC motor operating at either 24 or 36 volts. The displacement is
1012 lbs.
Plans available from Glen-L Marine,
9152 Rosencrans Ave., Bellflower, Ca 90706 Phone 562-630-6258
Glen L Boats
This 15 1/2" stitch and glue construction electric launch is
15 ft 7 inches long overall, has a beam of 6 ft and weighs about
940 pounds with passengers and batteries. The power is an electric
golf cart motor with either a conventional inboard shaft installation
or the GLen-L electric drive which utilizes an inboard installation
of a retired outboard lower unit. The boat is designed for 2-5
passengers and has a rahge of about 5 hours at a spd of 4-6 mph.
Plans available from Glen-L Marine,
9152 Rosencrans Ave., Bellflower, Ca 90706 Phone 562-630-6258
Glen L Boats
This stitch and glue construction electric kayakK launch is
16 ft 10 inches long overall, has a beam of 6 37" and weighs about
110 pounds. The boat is powered by a built in electric trolling motor.
The boat is designed for 1-2 passengers.
Plans available from Glen-L Marine,
9152 Rosencrans Ave., Bellflower, Ca 90706 Phone 562-630-6258
Glen L Boats
This tack and tape construction electric skiff is
15 ft long overall, and is powered by a transom mounted trolling motor.
The boat is designed to enclose the batterries and othe components
for the electric power.
Plans and kits available from Cheasapeake marine,
CMD Boats
This 18 ft electric powered Launch Cruiser has a top speed of about
5 knots and a 24 hours
range at a lower cruising speed with two banks of batteries.
Plans and Kits available from Cheasapeake marine,
CMD Boats
This 21 ft electric powered Launch Cruiser has a number of power options.
Solar charging is also available on one model.
Plans and Kits available from Cheasapeake marine,
CMD Boats
This 40 ft hybrid electric Cruiser has several powering options
including a DC generator.
Plans and Kits available from Cheasapeake marine,
CMD Boats
This 40 ft Cruiser is adaptable to similar Hybrid power as
for the Redwing 40 above.
Plans and Kits available from Cheasapeake marine,
CMD Boats
This 18 ft Cuddy Cabin Electric Cruiser uses a 2 hp electric motor.
Plans are available from Duckworks Boat Builders Supply,
Duckworks Boats
This 11 meter cabin boat has nice accomodations and can acheive a
speed of 8=9 knotsup
Plans are available from Storerboatplans.
Michael Storer Boat Design
Go to Home Page
Go to Top of Page