770-427-3116 / 800-282-7989 Fax - 770-424-3488
562 Magnetic Scale Holder
This permanent magnet with
approximately 15 pounds of pull will hold a scale firmly against
any ferrous material, regardless of surface orientation. The
model 562 has accurately ground edges at 90 degrees to assure the
scale is perpendicular to the surface. A thumbscrew lock mounts
the scale securely to the magnet. Use the model 562 with optical
tooling scales from three to 20 inches.
Approximate Weight: Holder; 1 pound; shipping, 2 pounds.
562-41 Magnetic Scale Holder
This magnet operates similarly to model
562. Model 562-41 is a bigger, stronger magnet for use with the
model 564-40 optical tooling scale. Note: This holder may not be
shipped by air.
Approximate Weight: Holder; 4 pound; shipping, 5 pounds.
563 Scale Level
Two bull's-eye levels are mounted at
right angles to one another and establish either a level or
vertical attitude of the scale. The model 563 conveniently clamps
to the scale with a thumbscrew lock.
Approximate Weight: Level; 1 pound; shipping, 1 pounds.
Light Sources
The addition of a light source to an
instrument line of sight allows you to use any Brunson instrument
to its fullest potential.
Transformer
110-volt input: 3.5 and 6.0-volt A.C. output. Part number 8819-G1.
220-volt input: 3.5 and 6.0-volt A.C. output. Part number 9119-G1.
500 Light Source (Transformer included)
Provides reticule illumination for instrument models 81 (all versions), 82, 83 (all versions), 193- and 76-RH cross scope. Use replacement bulb number 2680 only.
Approximate Weight: Light source, 2 pounds; shipping, 3 pounds.
501 Light Source (Transformer included)
Compatible with eyepiece models 191 and 196-1. Use repacement bulb number 1701 only.Approximate Weight: Light source, 2 pounds; shipping, 3 pounds.
502 Light Source (Transformer included)
Compatible with eyepiece models 192. Use repacement bulb number 2680 only.Approximate Weight: Light source, 2 pounds; shipping, 3 pounds.
Call or e-mail for your quote.
Specifications subject to change without notice please call to verify.