USB examples

Unzip these to C:\ with "use folder names" and "overwrite existing files" checked in WinZIP. 
If using XP extract to C:\
The projects will be unzipped to C:\EPIC\projects\<project name>

  In EPICenter, F9 to compile, F10 to load.

ScanAll.zip  Simple example to show all buttons on First expansion module DB15 connectors,  Module1 (on 40 pin ribbon connector wires 9-24) and Module2 (40 pin ribbon wires 25-40). EPICenter tools\epic info\ buttons to see buttons. A checkmark indicates the switch is "on" (closed).

BaseTick.zip    This example shows how to use a base tick loop to control lamp flashing,  execute timed jobs, rotary speed detection and other rotary examples.

DisplayExample.zip  defining and using displays.

GearExample.zip  shows how to generate an event into FS2002. A switch is used for gear up/down

Stepper_example.zip  shows how to make a unipolar stepper motor move using 4 bits of an output module.

EPICINFOexample.zip    example of getting data from FS using Peter Dowson's EPICINFO. This example gets the manifold pressure and sends it to a gauge and to a display.

SimpleRotary.zip     example showing how to generate events with a single rotary. For more complex rotary usage see BaseTick example above.

SetNav1.zip example showing two methods of setting values in Flight sim using  EPICINFO. See Readme.txt in project directory