ICU  Instructions
1. create 2 temporary directories-
	At a DOS prompt
	type (Enter assumed at end of each line)-
	C:
	MD\TEMP1
	MD\TEMP2
	
1. Go to Intel web site at:
	http://developer.intel.com/design/motherbd/gen_indx.htm

2.  Download ICU for DOS version 1.45 disk one of two to  C:\TEMP1
3.  Download ICU for DOS version 1.45 disk two of two to C:\TEMP2
4.  change to \TEMP1 directory-
	C:
	CD\TEMP1
5. Extract files from 145DSK1.EXE-
	145DSK1
6. Extract files from SW.EXE to a blank disk in drive a:
	Place blank disk in drive a:
	Type (still in C:\TEMP1 directory)
	SW A:
7. Remove disk and label  "ICU 1.45 DISK 1"
 8. Insert a second blank disk into drive A:
 9. Change to \TEMP2 directory and extract files from 145DSK2.EXE-
	CD\TEMP2
	145DSK2
10. Extract files from SW.EXE to disk in drive A:
	SW A:
 11. Remove disk from drive A: and label "ICU 1.45 DISK 2"
 12.  Place "ICU 1.45 DISK 1" back in drive A:
 13.  Change to drive A:
	A:
 14: Run INSTALL program
	INSTALL

 	Choose drive to install to (will assume drive C: here)
 15.  When asked to overwrite AUTOEXEC.BAT or CONFIG.SYS specify NO.
 16.  Complete installation.
	This will create :  	
	C:\PLUGPLAY , C:\PLUGPLAY\DRIVERS\DOS, C:\PLUGPLAY\ICU 	directories
  17. Put a blank disk in drive A: and format with system
	FORMAT A: /s
	Label ICU Boot
  18.  Type 
	COPY CON: A:\CONFIG.SYS
	FILES=20
	BUFFERS=20
	DEVICE=C:\PLUGPLAY\DRIVERS\DOS\DWCFGMG.SYS
	<CTRL-Z>

 <CTRL-Z> indicates hold CTRL key down Then Z key 
 19.  Copy MOUSE.COM to A: (you may have to find this as it may be in a \MOUSE directory.  Change to the directory where the MOUSE.COM is located and type:
	COPY MOUSE.COM A:
20.  Type
	COPY CON: A:\AUTOEXEC.BAT
	MOUSE
	<CTRL-Z>
 21. With ICU boot disk in drive A: press "RESET" or <CTRL-ALT-DEL> to reboot from the A: disk.
 22. After booting change to ICU directory by typing:
	C:
	CD\PLUGPLAY\ICU
 23. Run ICU.EXE by typing:
	ICU
 24. Find the device (usually the soundcard or motherboard resources) that contains the GAMEPORT. 
	
 25. Remove or disable GAMEPORT and exit out of ICU saving where necessary.
 26. Remove disk from drive a and reboot.
 27. Follow instructions in WIN95.TXT (in EPIC95.ZIP) and get EPIC into DEVICE MANAGER.

 Good Luck