• Achieve defensible audits due to precise and correct tools!
• Complete inspection tool kits with all of the tools required to do the job right!
• ---FREE--- instructions and TIPS with ALL kits, to teach you how to use the correct tools properly and to have a better understanding of the rules. There are also tips on how to modify your equipment to get it to comply!
• ---FREE--- eye bolts are attached to the torso and head probes so you can now perform the 50 lb. of force head entrapment test with our exclusive PULL GAUGE!

COMPLETE 11-Piece Tool Kit

• Includes loads of instructions and TIPS to teach you how to use the correct tools properly and to have a better understanding of the rules. There are also tips on how to modify your equipment and play area to get it to comply!
• Head & Torso Probe (with EXCLUSIVE eye bolt attachments); With our exclusive eye hooks attached to the probes, now you can use our EXCLUSIVE pull gauge (50 lbf. gauge) to test for all of the head entrapments, including the flexible ones! Unique design allows use of the pull gauge.
• Pull gauge; attaches to the eye bolts on the Head and Torso Probes to check for entrapments in "non-rigid openings" of components such as nets, tot seats, pipes that flex, etc. INCLUDES maximum force indicator. (See ASTM section 6.1.2.1 and CPSC Appendix B.2.6.5)
• Protrusion Gauges; set of four, to test for protrusions and certain entanglements.
• Partially-Bounded Opening Template ("fish probe"); to check for special head & neck entrapments.
• 30" Radius & Length Gauge; quickly checks slide exit regions for proper radius of curvature and length. (See ASTM section 8.5.5.4 and Figure A1.25)
• Handgrip Template; easily verifies the minimum and maximum outside diameter of handgripping components (.95"-1.55" o.d.) and Sliding Poles (max. 1.90" o.d.).
• Neoprene Rods; the only kind that are acceptable to check for crush and shear points. The 3/16", 5/16", and 5/8" rods comply with the 50-60 Durometer hardness rating that is required for testing. (See ASTM sections 6.5 and 8.9.2.1, and CPSC sections 3.1 and 5.3.4)
• Gap Gauges; these are exactly .04" to check openings in S-hooks, clevises, etc. Get one FREE extra gauge! Easy to use! Gauge also hooks onto a tape measure for those out of reach openings! (See ASTM section 6.4.5 and Figure A1.19, and CPSC sections 2.5.2, 3.2 and 5.3.8.1)
• Angle Finder/Level; checks slide slopes, 55 degree angles, items that must be +/- X degrees from horizontal, etc. (as required by ASTM & CPSC).
• Line Level; for measuring swing heights from the point where the surfacing level should be (not from a pit/depression). Also saves on surfacing and shortens use zones. See instructions with kit.

PARTIAL 5-Piece Tool Kit

• Includes loads of instructions and TIPS to teach you how to use the correct tools properly and to have a better understanding of the rules. There are also tips on how to modify your equipment and play area to get it to comply!
• Head & Torso Probe (with EXCLUSIVE eye bolt attachments); With our exclusive eye hooks attached to the probes, now you can use our EXCLUSIVE pull gauge (50 lbf. gauge) to test for all of the head entrapments, including the flexible ones! Unique design allows use of the pull gauge.
• Pull gauge; attaches to the eye bolts on the Head and Torso Probes to check for entrapments in "non-rigid openings" of components such as nets, tot seats, pipes that flex, etc. INCLUDES maximum force indicator. (See ASTM section 6.1.2.1 and CPSC Appendix B.2.6.5)
• Protrusion Gauges; set of four, to test for protrusions and certain entanglements.
• Partially-Bounded Opening Template ("fish probe"); to check for special head & neck entrapments.

UPGRADE KIT (7-piece tool kit to upgrade partial kit from other vendors)

• Includes loads of instructions and TIPS to teach you how to use the correct tools properly and to have a better understanding of the rules. There are also tips on how to modify your equipment and play area to get it to comply!
• Pull gauge; attaches to the eye bolts on the Head and Torso Probes to check for entrapments in "non-rigid openings" of components such as nets, tot seats, pipes that flex, etc. INCLUDES maximum force indicator. (See ASTM section 6.1.2.1 and CPSC Appendix B.2.6.5)
• 30" Radius & Length Gauge; quickly checks slide exit regions for proper radius of curvature and length. (See ASTM section 8.5.5.4 and Figure A1.25)
• Handgrip Template; easily verifies the minimum and maximum outside diameter of handgripping components (.95"-1.55" o.d.) and Sliding Poles (max. 1.90" o.d.).
• Neoprene Rods; the only kind that are acceptable to check for crush and shear points. The 3/16", 5/16", and 5/8" rods comply with the 50-60 Durometer hardness rating that is required for testing. (See ASTM sections 6.5 and 8.9.2.1, and CPSC sections 3.1 and 5.3.4)
• Gap Gauges; these are exactly .04" to check openings in S-hooks, clevises, etc. Get one FREE extra gauge! Easy to use! Gauge also hooks onto a tape measure for those out of reach openings! (See ASTM section 6.4.5 and Figure A1.19, and CPSC sections 2.5.2, 3.2 and 5.3.8.1)
• Angle Finder/Level; checks slide slopes, 55 degree angles, items that must be +/- X degrees from horizontal, etc. (as required by ASTM & CPSC).
• Line Level; for measuring swing heights from the point where the surfacing level should be (not from a pit/depression). Also saves on surfacing and shortens use zones. See instructions with kit.

Articulate Probe and 25' Tape Measure (both sold separately)

• Articulated Probe; for crush and shear points accessible through openings less than 1". Sold separately from the kits.
• Tape Measure; allows the Gap Gauge to hook onto the end for those out of reach hooks! The 25' long tape measure features a lock and smooth return. Brand may vary. Sold separately from the kits.

Articulated Probe = $115.00 (price subject to change without notice)
Tape Measure = $10.00

How To Order;

Now accepting all major CREDIT CARDS through PayPal! PayPal is a secure site owned and operated by Ebay. Just email us a note regarding the tool kit you would like to order ("11-piece", "partial" or "upgrade"), the quantity of the order, along with the shipping address and any special instructions (overnight, etc.) and we will email you the invoice to pay via PayPal!

SHIPPING and HANDLING COSTS;
In the contiguous United States, shipping and handling is $35.00 for one 11-Piece Kit or one Partial Kit, $25.00 for one Upgrade Kit, to be shipped via regular ground. For two or more kits, special deliveries, etc. please call for a quote. Ask for QUANTITY DISCOUNTS!
Outside of the contiguous United States, please call for shipping and handling costs.

METHODS OF PAYMENT;